Tap aerator Hihippo HP 1.8 - 4.2 l/min start/stop

10 liters of water per minute

The usual aerator consumes that much water.

1.8 - 4.2 liters of water per minute

You will get such a low consumption after installing the Hihippo aerator. The flow rate depends on water pressure. You can stop the water flow using a button at any time.

How does it work?

This aerator has a needle stream. It reduces the water flow while spreading the stream pressure into single trickles. Thanks to this, the stream has a very high rinsing power, while the comfort of usage stays the same.

Ideal for kitchen faucets

Flow rate across the range of 1.8 - 4.2 l/min is ideal for the kitchen. This flow rate ensures comfort when doing the washing-up or when filling up the dishes with tap water, and generates significant savings at the same time.

You will find aerators for bathroom faucets under the adequate category in our store.

Practical start/stop button

This aerator allows you to turn on the water with just one touch! You can turn the water on and off with a button – there is no need to touch the faucet. This function is ideal for dishwashing, rinsing fruit and washing hands. After use, close the water flow using the faucet.

How much can you save?

Our clients confirm that after installing our water saving products in kitchen and bathroom faucets, and in showers, water consumption has dropped by 30% - 60%. For a 4-member family, considering the average water prices, it adds up to

190 - 380 £ annually!

How are such savings possible? You pay less for cold water, its heating and sewage disposal. That is triple the savings on each liter of water! Investment in the aerator returns in no time.

Eco-friendly solution

By buying this ecological product you help to protect the environment. You support the conscious and economical management of natural resources. Installation of eco-friendly devices and prevention of wasting water is a good step towards nature protection.

Male thread - M24x1 (the most popular)

Fits 95% taps. The thread on this aerator is on the outside of the housing and is 24 mm in diameter.

If you need an aerator with a thread on the inside of the housing, simply add a Hihippo thread adapter from our accessories section.

Fast and easy installation

All you need to do is unscrew the old aerator and screw in the new one.

Your installation should be equipped with check valves. This is standard in all new installations.

You are buying an original Hihippo product

Hihippo offers innovative water saving solutions. The model with a start/stop button and the model with flow regulation are this company’s patented products.