Flow regulator for taps EcoVand 5.7 l/min thread 3/8″ with check valve
- fits connection hoses under the basin or sink with 3/8 inch thread
- saves water even in the most rare type of faucets
- 2 pieces needed - for cold and hot water connecting hoses
- saves up to 43% water maintaining comfort of usage
- build-in check valve prevents water backflow into the installation
- maximum flow rate 5.7 l/min even at high water pressure
- complete resistance to scaling
- plastic cartridge provides resistance to corrosion
- highest quality
10 liters of water per minute
The usual aerator consumes that much water.
5.7 liters of water per minute
You will get such a low consumption after installing EcoVand regulator.
How does it work?
The integrated pressure control o-ring system limits the flow of water. At a very low pressure, the rubber ring does not cover the small outlets. As the pressure increases the o-ring system dynamically adjusts the clearance of the outlets, thus reducing the flow of water. As a result, regardless of water pressure, the regulator will reduce water consumption up to 5.7 liters per minute while the comfort of your shower experience stays the same.
Built-in check valve
The regulator has an integrated check valve, which prevents water from back flowing. This feature is very useful when mounting aerators with a flow rate below 3 liters per minute. We also recommend installing this regulator if you are planning to use an aerator with a start/stop button.
How much can I save?
Our clients claim, that after installation our water saving products in showers, kitchen and bathroom faucets, water consumption drops by 30% - 60%. For a 4 member family considering the average water prices, it is about
190 - 380 £ annually!
How is it possible? You pay less for cold water, its heating and sewage disposal. That is triple the savings on each liter of water!
Eco-friendly solution
By buying this ecological product you help to protect the environment. You support the conscious and economical management of natural resources. Installation of eco-friendly devices and prevention of wasting water is a good step towards nature protection.
Assembly
We recommend installing one regulator on each of the connection hoses (hot and cold water).
You should mount the regulator between the valve and the connection hose.
Original EcoVand product
All EcoVand products are tested and improved to obtain the best parameters to save water while ensuring high comfort and joy of use. Thanks to the thoughtful design and technologies used, EcoVand products are very effective and eco-friendly. Using EcoVand products is a pure pleasure.
Product reviews flow regulator for taps EcoVand 5.7 l/min thread 3/8″ with check valve (1)
Good product, solved my problem